Rudder Template Home › Forums › General Olson 30 Discussions › Rudder Template This topic contains 4 replies, has 3 voices, and was last updated by Bruce Hubble 6 years, 3 months ago. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts February 22, 2012 at 9:27 pm #1869 Jonathan NyeParticipant Anyone have a rudder template? My rudder has some serious lumps and asymmetry. April 5, 2012 at 12:47 am #2661 Bruce HubbleParticipant I think drawings are available. Have you found them? April 5, 2012 at 1:59 am #2662 Jonathan NyeParticipant Haven’t gotten any feedback. Have access to foil generating software and may just make my own once I settle on a shape. But if there are drawings out there sure would be easier to start with those. April 5, 2012 at 7:29 pm #2678 Old SchoolParticipant The new page is a bit messed up, but the info is here: http://www.olson30.org/the-boat/tips-and-tweaks/rudders April 5, 2012 at 7:49 pm #2679 Bruce HubbleParticipant I guess not much help unless you have an elliptical. I’ll do some search for the spade, but I’m betting it’s not out there! Author Posts Viewing 5 posts - 1 through 5 (of 5 total) You must be logged in to reply to this topic.